Quantcast








     

help with YGE Vbar ready ESC & mini Vbar *Update*

helifreak.com - 2013-05-10 00:40:29 - Similar - Report/Block

Wow not like this has been asked a million times. I have a newer version 90LV YGE that came with my Logo 500SX combo kit. It has the main throttle lead and the slave lead. The slave lead has the orange signal lead(not sure this is what it is) coming off of it. The orange signal lead is by itself in a servo style connector. So 1. Does this...

WTT Full Size VBAR Pro for Mini VBar

helifreak.com - 2012-09-30 03:54:04 - Similar - Report/Block

I purchased this VBAR from HF member Pinion and hoping this will fix my wagging problem with my Logo 400. But my BeastX is more resistant to vibes. I would like to trade this for a mini vbar (must be blue line and must have pro software already installed). I'm planning to use the mini vbar for my TREX 450 pro. This is only the main contro...

Mini Blueline Vbar Problem with Firmware Update

helifreak.com - 2013-03-04 00:58:59 - Similar - Report/Block

Hey guys so I have a Mini Blueline vbar that is 5.0 express. I got the serial number and went to Mikado's site and purchased the 5.3 pro software. I made sure that the serial number was correct. It was. I have a picture of my receipt and the Vbar Software selection next to each other to show that I have the right serial number , they are...

Mini V-Bar case for old version

helifreak.com - 2013-06-11 10:57:20 - Similar - Report/Block

I have a Mini Vbar which have 3 separate sensors just like the Gaui Mini Vbar Now my case is broken and I want to have another one but still dont know will the MIK4444 Mikado Blue Mini V-Bar Case fit with it because I heard some people said that MIK4444 can be used only with the Mini V-Bar which has 3-axis single sensor and have no bar to...

Mini Vbar instead of Beastx

helifreak.com - 2013-04-20 23:58:00 - Similar - Report/Block

I bought a 300x with no beast and put my Mini Vbar unit on it instead. Upon spool up it flopped on its right side causing the main shaft to break. Is there anyone out there running a mini vbar as well? I am guessing it is a vibration issue.

[SOLD] Blueline Mini-vBar v5.3 Upgraded to Pro! - $275 Shipped CONUS

helifreak.com - 2012-10-15 02:17:55 - Similar - Report/Block

I decided to switch to a full-size vBar to make wiring easier for the external governor on my TDR, so somebody is going to get a great deal on a like-new blueline mini vBar! This vBar has been upgraded to version "v5.3 Pro" ($45 value) Attached Thumbnails...

Few questions about VBar

helifreak.com - 2013-03-26 00:47:47 - Similar - Report/Block

1. Is the Gaui VBar the same as Mikado VBar? 2. Does the Mini VBar work with Spektrum DSM2 Satellite receivers? 3. Can you use a 6 channel radio with the Mini VBar and Satellite receivers?...

Vbar Server Down?

helifreak.com - 2013-02-26 08:55:55 - Similar - Report/Block

I just purchased the Pro software for my silverline and payment was made via paypal. But when i clicked on the Online update from the V5.3 software, a prompt came up and says: "Unable to connect to Vbar Server on Vstabi.info Connection Time Out: Connect" Anyone encountered this before? It was smooth sailing on my other vbar pro version do...

My Ikon for your Mini Vbar

helifreak.com - 2013-04-16 06:23:46 - Similar - Report/Block

I want to trade my Ikon Flybarless buyed by Black Friday for your Mini Vbar or Blue Full Size Vbar. Working perfectly. I just want to try something different.

Trade SK540 4 flights Old for Mini VBAR

helifreak.com - 2013-03-12 06:43:14 - Similar - Report/Block

Trade my SK540 for Mini VBar Blue Line with Pro Software. SK540 is good but prefer programming the VBAR. Attachment 402779 Sent from my iPhone using Tapatalk Attached Thumbnails...

Mini VBar $175 brand new

helifreak.com - 2013-03-26 05:57:09 - Similar - Report/Block

I've got a mini VBar in my Gaui Formula kit which is brand new. I plugged it into the computer and did a setup to confirm everything works though I've decided I don't wish to avail myself of the advanced functionality and will stay with the AR7200BX which I'm happy with. It's exactly the same as the regular VBar but it's yellow. Sensor bo...

Mini Vbar with pro upgrade ,like new.SOLDSOLDSOLD

helifreak.com - 2013-02-25 03:03:35 - Similar - Report/Block

Hi Guys, I'm selling a like new Mini Vbar with pro software upgrade, Mini V has been used for about 10-12 flights only,perfect shape. Comes with Manual and USB cable , no box. $265+$6 for shipping.SOLD Paypal only (as gift or add 3%,Check feedback) Thanks, epc2. PS: I can't ship until the end of the week. Attached Thumbnails...

evolveStar Join

Help with Jive 100lv/Mini vbar 5.2 express

helifreak.com - 2012-09-17 05:18:40 - Similar - Report/Block

My new Jive 100lv is on the way and I have a question on how to connect it to the mini vbar. I've read the jive has 2 wires for the bec. How do I run these to the mini vbar while using the buffer pack? Thanks in advance.

mini vbar firmware upgrade

helifreak.com - 2013-04-19 02:41:42 - Similar - Report/Block

hallo i bought used mini vbar with 5.2 express software, been trying to upgrade to 5.3 software but no luck seems like an error or something else do you guys have any clue how to solve my problem this is my first experience with vbar fbl. 5.2 software feel oke to me but want to try 5.3 before jump to pro softwre thanks before. lev...

Brand new Mini Vbar 5.3 Blueline

helifreak.com - 2012-08-24 00:33:45 - Similar - Report/Block

Hye guys I have a 2 flight old Mini vbar. I upgraded it to 5.3. It retails for 300 plus 50 for the upgrade. Thats 350 total. 225 shipped...

Logo 600SE, Mini VBAR, Jive 80HV, Futaba SBUS help

helifreak.com - 2013-02-08 03:26:32 - Similar - Report/Block

I have to say this is information overload. This is my first build with a VBAR and Jive gear and I am finding the learing curve to be quit steep. I have read and watched a lot of videos and still cant put this all together so I am looking for some advice or to point me to other source please. VBAR is the Mini V-Bar "Blueline" 5.0 Express.

E6 swash settings on mini vbar?

helifreak.com - 2013-06-04 03:17:57 - Similar - Report/Block

can somebody tell me the correct settings on the mini vbar to set up the 140 ccpm swashplate on a jr e6 550 ? i set it to 270 130 and 50 .in the advanced menu..not sure if thats right.

Mini Vbar Blue w/5.3 Pro.

helifreak.com - 2012-09-05 04:30:12 - Similar - Report/Block

Hi Guys, Selling an extra Mini Vbar with 5.3 Pro software, unit is in great shape with no crashes and just 4 months old,it comes with patches , manual,box USB but no mounting tape. $260+$6 for shipping. Paypal only (as gift or add the fees, check feedback) Thanks, epc2. Attached Thumbnails...

Mini Vbar Pro 5.3 Blue line SOLD

helifreak.com - 2012-08-07 20:19:39 - Similar - Report/Block

For Sale, Mini Vbar with 5.3 PRO installed. Works perfect...never crashed low flights. Comes with original box. SOLD Shipped CONUS.

My computers can't discover my Vbar bluetooth interface

helifreak.com - 2013-05-13 04:57:14 - Similar - Report/Block

It seems likely that I'm doing something dumb, but I don't know what. My computers can't detect the vbar bluetooth interface at all. Same on both Mac and Windows 7. Both can talk to the vbar via USB, but when I power up the vbar with the BT adapter attached the computers can't see it. I have set the pin via usb, but I can't get far enough...

Punch out tail issue.

helifreak.com - 2013-02-26 09:19:04 - Similar - Report/Block

I just installed a new KDE 500 motor on my Trex 500, in-conjunction with a CC Talon 90 ESC and the Mini Vbar Pro governed with the CC internal governor. I get no tail wag but on punch outs the tail moves about 20 degrees to the right which is against the main rotor rotation. I tried adjusting the pre com which didnt seem to help much. Oth...

Mini V-bar, Blue or black, on Trex 250

helifreak.com - 2012-09-14 10:18:30 - Similar - Report/Block

Not sure if the Mini Vbar is the best for my little Rex, so I will just ask. Anyone used a mini bar on a 250 and how did it work? should i just get a 7200BX or any other option? Thanks for the input...

mini Vbar drift

helifreak.com - 2012-08-25 23:04:04 - Similar - Report/Block

I'm getting left drift and some backwards drift with a mini vbar on a 600efl and a dx8 tx. I have been working on this for a month with some local help. So far we have increased deadband. Powered it with other power supplies. rerouted cables. Replaced Sat cables. Downgraded to 5.2 and it helped. It was rock soild for a few flights. redone...

Will Full Size Vbar Fit?

helifreak.com - 2012-08-26 19:18:07 - Similar - Report/Block

I'm in the process of adding a mini p to my fleet of Logo 600's and soon a 700. I don't have any mini vbars but do have an extra full size vbar. Has anyone put a full size on a mini p? I thought I could stick the sensor unit on the top shelf and hopefully have room for the main unit on the bottom plate.

Update Galaxy S3 Mini I8190 with Jellybean XXAMB3 4.1.2 Firmware – Guide

androidadvices.com - 2013-03-12 18:25:33 - Similar - Report/Block

Samsung Galaxy S3 Mini… users can now enjoy BIG as an all new firmware has hit the Samsung servers and now can be updated in your phone. This firmware ropes in the Jellybean 4.1.2 firmware version and is dubbed as Galaxy S3 Mini I8190 to XXAMB3. This firmware doesn’t come up with any major updates apart from Bug fixes which used to heat...

Mezon w/ mini V gov?

helifreak.com - 2013-04-17 03:05:09 - Similar - Report/Block

anyone having any luck running the mezon with mini v bar and vbar gov? I am getting it to setup and look correct in the software but on spoolup its like 2/3 throttle here are my settings mezon fast response fixed endpoints 1.10ish and 1.90ish running sensor wire from mezon to top rx-a and even tried running ground to bottom port of rx-a v...

howcome... it's this much better?

helifreak.com - 2012-10-31 08:38:47 - Similar - Report/Block

Hey guys... I built my very first Logo last week. I've got some experience in building Aligns etc, so I'm not a newbie... My first impression when I opened the box was "gosh, this looks cheap stuff... " Anyway, the electronics that went in it are good. Savox servo's, YGE 120 esc, scorp motor, mini vbar, ... First impression in flight: :wo...

Mini VBar Loose Inside ?

helifreak.com - 2012-09-05 07:33:44 - Similar - Report/Block

Hi, I bought a Protos Heli from a guy. It had a mini VBar on it. When I started stripping it down found the the circuit board inside the case is loose. Is this OK or normal ? Doesn't seem correct. I took the four screws out looked in. It looked OK. Put it back together but is still loose inside ? I guess when I connect the servos etc up i...

WTT: Skookum 720 with field commander and power bus and $ for Mini blue Vbar pro

helifreak.com - 2013-02-15 06:05:25 - Similar - Report/Block

like the title says i ahve a skookum 720 with field unit and power bus and some $ for a mini blue vbar pro...

Goblin 500, DX8, Mini Vbar, Gyro gain

helifreak.com - 2013-02-26 01:09:14 - Similar - Report/Block

Still have not maidened the Goblin. I have the Vbar setup but stumped on the gyro gain. I've only used BeastX before this. Is there a comprehensive guide on gyro setup on the vbar. For those that have maidened, what value did you use for gyro gain in the software. I'm lost when it comes to this bank switching an all.

NOS Ever Ready

badgerandblade.com - 2012-08-23 20:28:37 - Similar - Report/Block

Found it out in the wild today. I'm not sure I can bring myself to use it, it's minty. Ever Ready 004.jpg Ever Ready 006.jpg Ever Ready 007.jpg Ever Ready 009.jpg Ever Ready 011.jpg Attached Images Ever Ready 004.jpg (19.9 KB) Ever Ready 006.jpg (21.4 KB) Ever Ready 007.jpg (29.8 KB) Ever Ready 009.jpg (27.4 KB) Ever Ready 011.jpg (25.6 K...

I8190DXALL3 – Install Android 4.1.2 Update on your Samsung Galaxy S3 Mini using Odin

theandroidsoul.com - 2012-12-31 16:35:49 - Similar - Report/Block

So you bought a Samsung Galaxy S3 Mini, the mini version of the Galaxy S3 that doesn’t really have anything in common with the latter except in looks, and were excited to get Android 4.1.1 Jelly Bean out of the box. That’s all good, but sadly, by the time Samsung launched the S3 Mini, Google... The post I8190DXALL3 – Install Android 4.1.2...

Vbar and Orange Satellite Rx

helifreak.com - 2013-04-19 22:27:32 - Similar - Report/Block

Hi Guys, Is it OK to use the Orange satellite receivers from Hobbyking with a blueline mini Vbar(V5 pro version)? They state it's DSM2 compatible. Cheers.

Gaui Vbar updated to Pro for $45

helifreak.com - 2013-04-26 05:19:57 - Similar - Report/Block

Has anyone updated their vbar recently, it's still 79 Euro? Empire Hobby list cost only $45. http://www.empirerc.com/gaui-mini-vb...6 4-p-7207.html...

mini vbar w/ remote dsmx sats

helifreak.com - 2013-02-25 04:30:20 - Similar - Report/Block

can anyone help w/ how to bind DX8 / remote dsmx satellites and vbar 5.3?...

Full Sized Vbar on Goblin 500

helifreak.com - 2013-05-20 15:17:28 - Similar - Report/Block

Would a full sized vbar fit the frame of a goblin 500? Any suggestions on electronic placement? Or should I just get a mini vbar? Has anyone tried this? I am just not familiar with the airframe and electronic placement. I am just curious before I purchase a goblin 500. Thanks so much! Dan...

Re; Vbar and Spektrum satalites

helifreak.com - 2013-05-02 09:50:15 - Similar - Report/Block

I have a question. I have a T-Rx550 and powered on everything. The Vbar and all the servos look good. There are two DMS Satalites the one on the left hand side doesn't light up and the one on the right hand side blinks.I tried all the stick movemnt and they work ok. I am new with the Vbar set up so not sure if this is correct.I thought th...

Hobby Wing ESC and vbar Gov

helifreak.com - 2013-05-04 15:01:52 - Similar - Report/Block

On Mr Mels Vbar & ESC list it mentions to have the latest version 1.08U. Mine is current at 1.05U but on the right upgrade version tab is states for the Platinum HV series to be on 1.05U. My program box on the other hand says 1.08 and it says there is a new version 1.11?? Should I leave it or update it?...

Black Vbar 5.3 pro

helifreak.com - 2012-11-06 04:01:38 - Similar - Report/Block

Black controller and sensor. Upgraded to 5.3 pro. Flies fine but I want to switch it out to a Skookum or mini vbar so I can consolidate some wiring and hardweare. It's on a compass Atom 500 and I don't care for all the clutter. I will take 150 shipped/PP. My phone is not uploading pics right now. I will post them in the morning...

Need help with Mini V, rolls left in ST2 mode

helifreak.com - 2013-04-10 03:40:38 - Similar - Report/Block

I'm trying to dial in a new Gaui NX4 w/Mini Vbar. I'm using the mounting tape/metal plate that came with the kit and was intended for use with the Vbar in this nitro application. I haven't done a lot of tweaking because it flys pretty well right out of the box until I flip to FM2 and then it wants to roll left rather quickly. You need to...




dialogShowMessage!

Fill out the form you see below. Registration is free, fast and simple.
If you are already registered, sign in page login.


Web Site :
Required Field
First Name :
Required Field
Last Name :
Required Field
Email :
Required Field
Sex :
Required Field

evolveStar.com is free for ever !


evolveStar.com provides a search engine that allows you to gather information to write their own blog.


evolveStar.com enhances the sources displaying the logo of the site.


If you want to remove your site or you believe a site listed infringes copyright, please report it to: info@evolvestar.com


Specifies the subject copyright violation and the url of the page


evolveStar.com respecting the law DMCA (Digital Millennium Copyright Act) will immediately remove whatever its merits.


Next will be effectual and relevant checks.







Who We Are Partner Advertising Contacts Privacy terms Help & FAQ

© Copyright 2010-2017 Fabrizio Fichera. All rights reserved.