General and DS35 tip I found

helifreak.com - 2013-03-22 16:45:30 - Similar - Report/Block

So I rebuilt my 130 and swapped out a servo on the cyclic and replaced the tail with a DS35. I failed to tag or replace the remaining servos in their original location-so once I had it all built up, it would just spin around!! Thought it was a bad tail servo or had it reversed but swapped it out and still had same problem. So after notici...

DS35 Servo Wiring Pic Please

helifreak.com - 2012-09-09 02:09:30 - Similar - Report/Block

Someone who is skilled at the art of knowing which colored DS35 wire is to be soldered into which colored mini-JST wire, could you please post a picture or write out which one goes to which? Cause the wires on the DS35 are colored different then the stock servo. Don't want to mess it up or have to solder more than the first time. Measure...

exploding ds35 servo

helifreak.com - 2013-02-25 14:05:24 - Similar - Report/Block

Hi could anyone help. when flying my 130x this morning the ds35 servo exploded seems like it trying to spin continuously . attached was the overlander 40c 450mah battery would this cause the servo to blow from extra power. before this happened used the original battery with no issues?.

130x and DS35 Tail Servo

helifreak.com - 2013-06-10 03:37:09 - Similar - Report/Block

Ok so I'm not sure if this has been addressed already but figured I would ask. I have a totally upgraded 130x that as of now is totally useless. The new DS35 tail servos don't work. Is there any news about a possible fix to this from HH? I don't really want to convert back to the original servo setup to find out that HH has a new DS35 com...

back to stock tail servo - not happy

helifreak.com - 2013-06-10 02:57:06 - Similar - Report/Block

I busted my DS35 last week and given the issues with the "new generation" DS35 I decided to go back to the stock tail servo (and put in an online order for the Walkera servo that people are reporting some success with). I have been flying for around 6 months now and the 130X was my first heli. When I originally put the DS35 in, I was pret...

EFLR7100 tail servo success

helifreak.com - 2013-05-10 04:24:48 - Similar - Report/Block

Just thought I'd post my experience with this. Had one of these servos hanging around for my 540QQ plank (great plane btw) and figured I'd give it a try. It uses the same plug as the ds35 so I simply unplugged my ds35, plugged in the 7100, connected a battery and it worked perfectly. Next step, mounting. Took a stock tail servo mount and...

Tail servo dead, DS35 on the way!

helifreak.com - 2012-10-12 02:03:45 - Similar - Report/Block

After seeing TNT's tail servo, I've really been looking for a good excuse to put in a DS35 for my tail servo and today's my lucky day! My tail servo died in mid flight causing an awesome piro then a crash into the pavement that broke my landing gear. I CA'd it back together just to have it as a spare which gives me a great excuse to buy t...

Goodbye stock tail servo. Time for a ds35?

helifreak.com - 2013-02-26 05:05:34 - Similar - Report/Block

About 40 flights in and the inveveadable. My tail stock tail servo started lockin up. I am surprised it lasted this long based on otheres experience. Had a minor crash inverted as the went into an unresponsive piro. Hit TH and no major damage. Just some scuffed tail blades. Should I even bother calling HH about a replacement servo or just...

Tail Servo Stopping

helifreak.com - 2013-03-18 07:03:13 - Similar - Report/Block

This is I do not understand. I have a DS35 and HH Metal C and D gears with Spin 8000. Today I was flying my 130x sport flying and for no reason at all the tail servo stop working and I ended crashing the 130x and when pick it up and inspected the tail work again. I have tried it moving it while I'm holding the heli and sometimes it stops...

DS35 as elevator servo

helifreak.com - 2013-02-26 14:52:53 - Similar - Report/Block

I got fed up of replacing burt out stock elevator servos so have mounted a DS35 alongside the stock motor on outside of battery holder plate, using existing linkage wire and just removing the middle plastic bar of the battery support platform so the servo arm can go through. 2 screws hold the servo snug, canopy fits and heli flies fine. T...

DS35 Settings

helifreak.com - 2013-04-11 03:22:54 - Similar - Report/Block

Having a bit of trouble with a customer's 130X He's got a complete MH tail and a DS35 servo running the tail. He hasn't been able to fly it since upgrading from stock because he stripped out the C gear while installing the new tail. Unfortunately, after fixing that I'm having loads of trouble trying to test fly this thing because of a wic...

DS35 twitching at center stick?

helifreak.com - 2013-04-24 02:42:24 - Similar - Report/Block

My trusty DS35 that I have been running for around 35 flights is now started a bad twitching at center stick. If i give it left or right or push slightly on the servo horn it stops. Then comes back again on its own. Its not the board as I've tried it with 2 of them. Any ideas? Is this servo on its way out? Does hitec make a comperable or...

evolveStar Join

JR DS188 servo?

helifreak.com - 2013-04-12 06:19:03 - Similar - Report/Block

Has anybody tried out this servo on the tail yet? RKH does have a tail servo mount for it now and it works with the DS35 too. http://www.horizonhobby.com/products...- servo-JRPS188 Attached Thumbnails...

Anyone had success with latest DS35

helifreak.com - 2013-04-11 05:24:38 - Similar - Report/Block

The thread titled 'Tail Wag with DS35' would suggest that HH have changed the DS35 with it's latest batch and they are not performing well at all ! Is there anybody who has bought and installed a DS35 in the last few weeks and been happy with the upgrade ?...

DS35 Servo Mystery Solved For Now

helifreak.com - 2013-04-19 23:35:34 - Similar - Report/Block

Installing the old style DS35 main circuit board in the new style servo alone did not help in my case, but installing the old style feedback potentiometer along with it did! They are quite different from the new resistors and so is the way they mount to the gears (see attached pictures). The old style potentiometer required using the old...

DS3 servos - the OLD ones

helifreak.com - 2013-04-17 04:31:18 - Similar - Report/Block

If anyone has the old style ds35 servo that works on the 130x without making the tail wag, I'll pay you 30 bucks for one, maybe even two. Please post pic of servo so i can see it. Thanks...

E flight tail servo

helifreak.com - 2013-03-11 03:31:40 - Similar - Report/Block

Hi, Anybody have the E-Flight DS35 tail servo installed on your V120DO2S or V2. A. What are the benefits B. Any mods to it to make it fit C. What servo horn did you use with it? or anything else I should know before I get into this? Thanks...

DS35 tail servo i get wag with it

helifreak.com - 2013-06-10 16:04:13 - Similar - Report/Block

when i install the regular servo it is smooth , i mostly had it to go with my bling bird. is this mod really worth it . i mean it flies better in backwards flight then regular with the linear servo ? how much more effort should this take . i lowered the gyro down but it didnt help thank you...

Microheli rotary frame ... does it work with DS35???

helifreak.com - 2013-04-23 03:12:44 - Similar - Report/Block

Hello I was trying to find out if the DS35 servos will work with the miroheli frame (rotary), contacted the manuracturer, haven't heard back yet :( Hoping some of you in HF have experience with it. i noticed some folks are using Hitec servos (two regular and one reverse servo), how about for the DS35 ... would three regular DS35s work wit...

Can't get rid of a wobble? Check your motor after everything else.

helifreak.com - 2013-02-18 05:15:21 - Similar - Report/Block

I've been chasing down this wobble, almost like a servo chatter, but not quite. I've swapped everything out except the motor. Could not get rid of the wobble. So for s-n-g's I swapped the motor out. Fixed my problem. After thinking about it, I realized I have several hundred flights on the motor. I spun it by hand and it made a squealing...

Does anyone have new ds35's for sale?

helifreak.com - 2013-03-17 05:44:00 - Similar - Report/Block

I need 4 DS35's and I was wondering if anyone has them in stock atm or selling them privately. I am tired of waiting on my 130X that has about 5 flights on it since last september (I think) and I just want to assemble and fly it. Was going to wait for the MH rotary servo frame but it seems that the next ice age will come sooner. Going to...

After servo rebuild, do I need to redo step J?

helifreak.com - 2013-03-21 17:14:15 - Similar - Report/Block

Slight crash on the TR 450 the other day (TR 450 Pro DFC, totally stock with the Micro BeastX). It took out the servo gears, main shaft and blades. I rebuilt the stock 415's servos and just set the horns to 90 degrees in step G. Powered up to check servo movement and the front two servos move as they should with aileron input. When moving...

smoked two servo's today.

helifreak.com - 2013-03-18 01:38:03 - Similar - Report/Block

Did a test on the 130x this morning after replacing tail shaft and tt in a crash. so go out and fly this afternoon and one of the elevator servo's smoke. Not super old but we all know. So far I have had them die but never smoke. flew the nano 3 times then the 4th time about 2/3 through the battery the power just goes and it falls. found t...

130x with several upgrades.

helifreak.com - 2013-02-26 19:19:33 - Similar - Report/Block

I have a 130x that is not fly able. I lack the expertise to get this little bird up and running. I believe it has a 3n1 issue. The motor will spin up, but no cyclic response. Somebody with more skills could easily get this thing flying I'm sure. -Metal A gear -DS35 servo upgrade and mount. (I don't think the servo is working, but I've inc...

Anyone already using a spin 8000kv added a ds35?

helifreak.com - 2013-04-11 02:40:34 - Similar - Report/Block

As above guys, my spin motor is excellent but I think the stock tail servo is struggling to tolerate the higher headspeed, I've lowered the gain on the board and played with various gains but can't seem to get the tail solid, today I stripped and cleaned ALL servos but not much better on the tail Anyone using the spin and a ds35?...

DS35 placement

helifreak.com - 2013-02-28 07:32:47 - Similar - Report/Block

I am about to finish the rebuild. I have the DS35 on with the microheli holder, but where exactly should the servo sit? RIght now I have it under the two tabs, but it seems like that is too tall and the pitch slider is at an angle. Don't think the bracket will fit inside the two tabs. Where should it go? Also, do I need to bend the pitch...

Servo Binding Problem

helifreak.com - 2012-10-02 15:47:22 - Similar - Report/Block

Hi guys, Had a pretty hard crash worst so far and the aileron servo is binding as you rotate the gears at one point. Looking at it with a magnifying glass I could not see any tooth damage but was fairly certain that is what it was. Yesterday I had a chance to work on it and found out the gears from my original MCX are almost identical to...

Which Servo is Which?

helifreak.com - 2013-03-28 03:01:20 - Similar - Report/Block

Hey guys, Just swapped frames and am trying to set up the BX and such at it appears I mixed up my wiring somewhere and the wires I marked are not working properly anymore.... Which servo is which on the 450X?...

Stock tail servo is the ticket

helifreak.com - 2013-05-02 04:01:09 - Similar - Report/Block

I just did a test hover after installing a new stock servo. Super smooth. Guess this is the way to go since the DS35 is not going to work for the 130 anymore.

Blade 300 rudder servo on a 130?

helifreak.com - 2013-05-29 07:13:02 - Similar - Report/Block

So I replaced all my stock servos on my 300-any idea if I can use the rudder servo on a 130 and get better results than a DS35?...

Misbehaving DS35 locks up.

helifreak.com - 2013-04-26 06:55:03 - Similar - Report/Block

So I put a Microheli tail pitch lever and a brand new DS35 on my 2s 130x, and after dealing with the blade grips flying off 4x in an hour, I glued them to the tail drive shaft. Now it flies great for about to 15 seconds, then it goes into a piro when I try to bog the tail. More specifically, it goes into a piro when I apply heavy negative...

300X change pitch

helifreak.com - 2013-05-04 23:33:42 - Similar - Report/Block

After a crash I rebuilt a servo. I installed the servo and set the blades to 0 pitch at mid collecitve. When I runup the heli it doesn't lift and then realized that the blades changed to negative pitch at mid collective. Any ideas.

New DS35 fix: Let's figure this out

helifreak.com - 2013-04-18 13:32:21 - Similar - Report/Block

I know there are enough of us out there with a new DS35 that we cannot use. Unless HorizonHobby comes out with a compatible product and offers a trade program, I don't think we're going to be able to unload these servos anywhere. So I'm proposing we (the collective "we", preferrably those with electrical engineering experience) come up wi...

servo hitting servo mount

helifreak.com - 2013-06-07 08:57:14 - Similar - Report/Block

Hi gents a mate crashed my trex 600 pro DFC and i just rebuilt it.Now i have a problem with the aileron on right side of frame hitting servo mount.I cant remember if it was hitting before or not but everything is setup correctly (meaning correct links,link balls and out holes etc).I took 2 pics to show u people whats happening.It only hap...

New 130X owner =) - DS35 servo in stock?

helifreak.com - 2013-02-25 16:53:46 - Similar - Report/Block

Hey, guys, New 130X owner here. I pulled the trigger last night (after MUCH debating) and ordered the Bonus Buy pack from www.ultimatehobbies.com and quite a few upgrades from www.directheli.com I picked up a sporty new canopy, two different color blade sets, spare TT gears, carbon TT, o rings, adj spacers, extra tail pushrod support, ly...

persistent tail blow out

helifreak.com - 2013-02-05 12:54:15 - Similar - Report/Block

I have had a lot of fun with my 130X but right now the tail just blows out even with just hitting the throttle. I don't have vibration issues, I have a DS35 tail servo (for a long time). The tail section is mechanically sound (quad bearings still pretty tight). I have tried different gyro gain settings and also moved the tail pitch slider...

Blade 130X with upgrades

helifreak.com - 2013-03-28 04:34:29 - Similar - Report/Block

For sale is my Blade 130X that has an upgraded hp08 motor, lynx swash, rakon tail grips, metal pitch slider, DS35 tail servo with metal mount, rakon carbon tail fin, lynx extended boom mounts, metal A gear, kbdd main blades,and fusuno canopy. Will come with 5 thunder power 65c lipos, and 2 stock lipos (one is not pictured but is new). Com...

Recommend EMI proof servo?

helifreak.com - 2013-05-10 07:55:21 - Similar - Report/Block

I don't have a helicopter question, its more general. I'm working with the Hitec HS-422 servo. It works fine until there is some EMI in the room from a high voltage coil I got. It starts bouncing around like a fish out of water. It's definitely the servo as I disconnected the controller and everything else and only applied 5V to it and it...

Parting out my 130X

helifreak.com - 2013-04-25 02:53:03 - Similar - Report/Block

All items are in like new condition! Can't get the XP-12A to work and I guess I damaged the esc on the main board because it doesn't work now either :bawl Don't feel like spending any more money on this thing... so I'm parting out the hop-ups and trashing the rest. RKH DFC Head - $30 RKH Swash - $15 Microheli Tail Boom Support Mount & Mic...

Can spin 8000 run on 3S? and a few other questions

helifreak.com - 2013-02-22 02:12:14 - Similar - Report/Block

I would like to know if I can safely run the Spin 8000 on 3S, which would give me mad power. I have changed over my 130x to tarot ZYX and using an external BEC and the XP12A, which I believe is rated for 3S max. Also, I would like to get the MH rotary servo cf frame for the heli, and I would like to know if I can use any servo other than...


Fill out the form you see below. Registration is free, fast and simple.
If you are already registered, sign in page login.

Web Site :
Required Field
First Name :
Required Field
Last Name :
Required Field
Email :
Required Field
Sex :
Required Field

evolveStar.com is free for ever !

evolveStar.com provides a search engine that allows you to gather information to write their own blog.

evolveStar.com enhances the sources displaying the logo of the site.

If you want to remove your site or you believe a site listed infringes copyright, please report it to: info@evolvestar.com

Specifies the subject copyright violation and the url of the page

evolveStar.com respecting the law DMCA (Digital Millennium Copyright Act) will immediately remove whatever its merits.

Next will be effectual and relevant checks.

Who We Are Partner Advertising Contacts Privacy terms Help & FAQ

© Copyright 2010-2017 Fabrizio Fichera. All rights reserved.