Quantcast








     

HK Turnigy 4956-1350kv Motor a No-go

helifreak.com - 2013-06-10 08:59:27 - Similar - Report/Block

I bought this motor (4956- 1350kv) and it arrived last Friday. http://www.hobbyking.com/hobbyking/s...i ze_heli_.html All looked good on paper since it was listed as having a 31mm shaft length (I already have a slightly larger model 4962-560kv motor was listed with a 32mm shaft length and this was correct). Actual shaft length was only 21m...

AS/A level module swap (edexcel)

thestudentroom.co.uk - 2013-06-06 13:14:21 - Similar - Report/Block

Hi, I did D1, S1, FP1 for AS further maths then dropped it. I have now done M1, M2, C1/2/3/4 for the full maths A level. I was wondering if I could swap S1 with M2 in my full maths A level, or would S1 have been cashed in and so unable to swap? I don't really understand why/how the AS gets cashed in, but I need to swap them to get a bette...

D15B VTEC swap

honda-tech.com - 2013-05-31 11:08:12 - Similar - Report/Block

I decided to go with a d15b vtec in lou of my stock d15b7 (non-vtec). Its my first swap so i have questions. I will have the p08 ecu. Car is a 92 civic dx sedan. 1st i need to know if it will bolt up to stock mounts and tranny. 2nd if ANYONE has done this swap please inform me what parts i may need. Im getting it from HMO and im hoping it...

complete Tarot 450 pro FBL ,turnigy er9x, extra servos, etc...

helifreak.com - 2013-05-21 16:11:53 - Similar - Report/Block

I started this project last year and thought I would finish it and never did. List of parts is below and I would rather not part it out becuase any part I sell seperately would leave me in a bind to never finish it if it didnt sell. The frame is used but in excellent shape. I bought it from a friend last year with very little millaege as...

Scorpion 2213-14 with BLHeli

helifreak.com - 2013-05-21 12:57:38 - Similar - Report/Block

Ive just managed to order what would seem to be the last scorpion 2213-14 motor here in the UK after much searching around.... So Anybody running a Scorp 2213-14 with BLHeli setup??? Also is it PNP? im looking at the specs and see motor mount holes are 16/19mm and wondered if this is going to just drop straight in (pinion 3.17 mod .5 requ...

Blade Nano BNF forsale! with extras

helifreak.com - 2013-05-16 07:32:09 - Similar - Report/Block

I bought this from a friend, fixed everything on it, and now that ive been flying it I think its a little to small for me. It has brand new, less than 5 flights on everything listed, Tail boom and tail motor, Frame, Main Motor, Swash plate, Main shaft. Spindle. Comes with 8 batterys, 4 eflights, and 4 turnigy. And a Hyperion parallel char...

Buddy codes to share

helifreak.com - 2013-05-05 13:10:42 - Similar - Report/Block

Turnigy 450 Series 3800KV Brushless Outrunner Helicopter Motor $11.65* (buddy price -17%, -$2.34) HK450V2 Timing Belt $0.52* (buddy price -42%, -$0.37) ZYX-S 3-Axis Flybarless System w/USB Program Adapter $45.38* (buddy price -19%, -$10.31) Turnigy FBL100 Linear Servo $8.78* (buddy price -12%, -$1.21) Turnigy FBL100 Main Frame $1.09*...

motor selection ?

helifreak.com - 2013-04-30 11:53:36 - Similar - Report/Block

on the drop down tabs for servos and for the motor , on cyclic servos i have turnigy 306 hv digital would 333hz be good for that ? and the motor /esc i have no idea what to select . i have a hobbymate 2835 3800 kv motor and a hobbywing 40 a esc with a 5 a ext sbec . i cant find any info on whether its analog , probably is / but i want to...

B18b1 into 97 civic hatch

honda-tech.com - 2013-04-26 09:18:15 - Similar - Report/Block

Just picked up a 97 civic hatch w/ no motor and no tranny. I'm not sure what motor was in there before but maybe a d16y8? Anyways.. I'm looking to put in a B18b1 from a 97 integra LS that I have my eye on. What do I need to do a complete swap beside the obvious (eng/trans)? I do realize this topic has probably been beatin to death. I did...

B18b ls swap checklist

honda-tech.com - 2013-04-26 07:36:51 - Similar - Report/Block

Planning on a local ls swap from a d16y5 97 hx, I need a checklist of everything I'm going to need THE FIRST TIME. 92-95 Ls motor and tranny, stock clutch and flywheel acura integra 92-95 halfshafts p72 or p75 ecu prechipped hondata ordered from Phearable.net obd2a to obd1 jumper harness Let me know if I'm missing, or need to be recommend...

v6 to 22re swap

yotatech.com - 2013-04-26 03:30:00 - Similar - Report/Block

ok guys so i found a 94 body for my 89 ex cab the only problem is that the 94 has a v6 with a automatic when my 89 has a 22re. i talked to a guy who told me its easy to swap the motors out the only thing is that you have to weld new motor mounts and swap the v6 with the 22re and swap the transmission and wire harness and computer. i was j...

Tarot 450 PRO V2 FBL w/electronics

helifreak.com - 2013-04-25 20:24:16 - Similar - Report/Block

For sale or trade for multi. Tarot 450 pro v2 fbl all assembled only needs rx and fbl controller. Never flown tried to set it up with a APM 2.5, but I could not get it figured out. Selling to fund multirotor project. This is a 6s setup electronics are as follows: ESC:Hobbywing 40a platinum pro w/programming card Motor: Align 450 mx 1700kv...

evolveStar Join

91 civic si motor swap.

honda-tech.com - 2013-04-25 01:42:02 - Similar - Report/Block

OK guys I am finally back! I have looked everywhere, but this is not exactly the most common swap... Right now I am driving a 1991 Honda civic si hatchback. It has a B18b1 motor controlled by B18A ECU. The wiring harness has been butchered a bit... I have the full motor (distributor and intake wiring harness and ECU included) from a 98 HX...

Turnigy H2218 motor with pinion and bullet connector

helifreak.com - 2013-04-20 00:52:29 - Similar - Report/Block

Used, Turnigy H2218- 3200KV motor with 13T Rhino Pinion and bullet connector I don't have the mount screws This motor: http://hobbyking.com/hobbyking/store...e r_3200KV.html $12.00...

Turnigy and TP Trex 250 batteries -

helifreak.com - 2013-04-12 09:47:12 - Similar - Report/Block

Used batteries from my Trex 250 I sold a little while back. Always in storage mode when not in use. TP no puffing. Turnigy's slightly puffed but still get good flight time. SOLD - pending payment x2 Thunder Power 25c 910mAh (w/ EC3's) - $30 for the set x2 Turnigy 20-30c 800 mAh (w/EC3's) - $10 for the set...

NY 1jz/2jz R154 Swap For Any S-Chassis And Other JZ Parts

zilvia.net - 2013-03-29 12:46:53 - Similar - Report/Block

1jz/2jz 154 rans low mileage (under 50k). 1jz/2jz bell-housing shifter extension schassis tranny bracket was removed from a jdm 2jzgte motor. decided to build another motor so selling my swap (motor already sold). $1000 + shipping. will trade for aftermarket hatchback body parts (widebody kits, vented hoods, Oem S15 front ends, carbon fib...

Beginner's 450 Build tale, and request for opinions

helifreak.com - 2013-03-28 01:58:35 - Similar - Report/Block

So I'm not long into this hobby, but have been a hobbyist my entire life (52 yrs old) So Friday night beer drinking and 4 channel microflying has led toward a desire for a 450 6ch. So I am building a CopterX 450 SEV2 with the (original) intent to take my time, do some simulator and try not to bin the sucker right away. A brief rundown of...

02 Gen5 Camry XLE 2.4L 4 cyl engine swap

toyotanation.com - 2013-03-20 04:02:41 - Similar - Report/Block

I have an 02 Camry XLE with the 2.4L 4 cylinder. It has 175k miles and I have been told I need an engine swap soon due to possible bad piston ring(?) question is that when I do this engine swap I want a more powerful engine so what are my options in doing so? I have looked at possible options of getting the replacement 2.4 with a turbo in...

Gens Ace and Turnigy 4S packs

helifreak.com - 2013-03-17 18:17:35 - Similar - Report/Block

I have 3 Gens Ace 4S 2200 packs and 2 Turnigy Nanotech 4S 1800 packs. Gens Ace packs have wear on the corners (they are protected by the metal plate that Gens Ace uses) from the canopy. All work great and have never been discharged beyond 80% or charged over 3C. Gens Ace packs are $10 ea Turnigy packs are $9 ea Add $5 for priority mail sh...

Turnigy 2836 950KV motor bearing size

helifreak.com - 2013-03-15 17:09:05 - Similar - Report/Block

Hi fellow freaks Does anyone know the bearing size for Turnigy 2836 950KV motor?...

CA Sr20 black top running full swap

zilvia.net - 2013-03-04 08:12:46 - Similar - Report/Block

Hey guys selling my sr20 swap cause my car has expired tags for 5yrs now and I can't afford to pay for it cause I'm jobless right now ima part out the whole car but just want to sale my swap its a running swap still in the car I'm looking for 3000 obo this swap is ready just turn the key if interested email me or txt adrianacocolan@yahoo.

Caulking (Silicone or 4200)?

cruisersforum.com - 2013-02-26 07:04:18 - Similar - Report/Block

I am starting to re-bed my deck penetrations and am finding that some are bed with silicone. Random ones to. One chainplate is 4200 caulk another is silicone. I've heard to never use silicone on fiberglass but also that if silicone is preexisting to use silicone because it only adheres to silicone. I want only 4200 caulking. Any suggest...

Can I put a D16y7 swap in a 92 civic?

honda-tech.com - 2013-02-26 00:51:31 - Similar - Report/Block

What's up h-t. I'm familiar with motor swaps, but I've never tried this one before. I'm just curious if its possible. My plan is to put my manifold and distributor on the y7. I'm just not sure if I can use the same ECU etc.. If anyone has some tips please let me know. Thank you...

HK Turnigy 2627-4200 Motor swap

helifreak.com - 2013-02-21 11:30:42 - Similar - Report/Block

Anyone changed the stock motor out for the turnigy 2627 - 4200kv motor? Im sick and tired of the vibes given off by the stock motor and the wicked has been out of stock every time ive had the cash :-( I have a turnigy motor in my hands right now that id like to swap out. Looking at the stocker i think they are what 4600kv? is there going...

Turnigy AE-80A any good for scale 500 flight?

helifreak.com - 2013-02-19 08:04:55 - Similar - Report/Block

Looking at electronics for a 500 clone kit I am going to cut my teeth on getting into scale flight. Plan to bump up to a 600 or 700 when I get the hang of the 500. I am starting with the standard 2 blade flybar rotor and a Turnigy H3126 1300KV motor recommended to me. Will later move to a 4-blade rotor so that motor should be fine for the...

Motor, Pinion, Head Speed

helifreak.com - 2013-02-04 04:37:48 - Similar - Report/Block

I am thinking of upgrading my motor. I mainly want to do it to for better COG and weight reduction. I am interested in the HP08. Is there a list of head speeds for motor pinion combinations? According to the cheapest tachometer that Turnigy makes my stock head speed is 4200 RPM at zero pitch, 100% throttle...

impressora scx 4200 não esta funcionando

babooforum.com.br - 2013-01-31 23:01:25 - Similar - Report/Block

tenho uma impressora scx 4200 Samsung multifunc ional a laser, monocromaticfa, quando liga ela fica fazendo o bnarulho que vai esquentar, o led correspondente não ascende e no visro aparece quadradinhos pretos, esquenta um monte mas não liga nada, alguém saber o que pode ser ?:...

rb25 engine swap

zilvia.net - 2013-01-31 06:48:41 - Similar - Report/Block

alright guys im planning on doing a rb25 swap i already have a rb20det in a 240sx but i got a rodnock and have been wanting to upgrade, was wondering if i could simple swap out the rb20 motor for the rb25 motor is it possible, what are the cons?...

Hobbywing vs Turnigy Firmware Upgrade

helifreak.com - 2012-10-24 06:46:35 - Similar - Report/Block

I posted this question to Bob O earlier who has been very accommodating to my inquiries. Does it matter which version you use (HW v Turnigy) to upgrade the firmware to the HW 2-in1 program box? I know many on this forum have had success with the Turnigy 1.62 firmware upgrade in improving the soft start with the 6HV. If I use the HW firmwa...

Not again Horizon Hobby... Nano CPX problem

helifreak.com - 2012-10-19 12:36:04 - Similar - Report/Block

My brand new RTF Nano came today. I charged the batteries and did some kind on "break-in" with first two batteries. Throttle 50% zero pitch. Not really the right way but I think that it's better than nothing. Then again batteries to charger and did radio setup to DX6i and read the manual and bind the nano with Turnigy Nanotech 130mah. Ok...

motor & esc set up?

helifreak.com - 2012-09-30 03:17:23 - Similar - Report/Block

ok, on my mini titan i have turnigy 55 amp dlux esc, turnigy batt. 2200 mah 25c, & a 2200 mah. @ 40-50c. a turnigy motor the red & silver, 7 pole, h2223- 3500kv. & a turnigy 9ch. i tried to search and cant seem to find the info. i pmed someone & just now thought about posting :oops:. ( not thinking clear, stearing at this...

Different C ratings - performance gain?

helifreak.com - 2012-09-15 13:11:04 - Similar - Report/Block

I have a Turnigy Turnigy 2836-3700kv with 13T pinion (150 main gear) motor with a Detrum 40 A ESC on my 450 Pro. My batteries are Turnigy 2200mAh 20C. When measuring the head speed I only get about 2500 rpm at 90% throttle and it seems to lack the punch I would like to have. I used to have a 11T pinion but after changing to 13T I seems to...

X525 folding frame quad

helifreak.com - 2012-09-11 19:18:25 - Similar - Report/Block

I have for sell an with upgraded Attachment 348272 aluminum motor mounts,has 4 turnigy 1100kv motors, and 4 HK 30amp esc's, has 10x4.5 props, and a multiwii warthox board with barometer, and everything, it is running multiwii 2.0, already has been setup, the self leveling could stand to be adjusted a little better flies very well, Will al...

450 3D motor and ESC?

helifreak.com - 2012-09-10 14:53:22 - Similar - Report/Block

I had the bright idea to throw my 450 3D's motor and ESC in this bird. I just started researching the differences in the motor and noticed the KV ratings. Why is the KV lower on the bigger motor? Does this motor have less performance? 300X has this: 320H Helicopter Motor, 4500Kv: 300 X 450 3D has this: Brushless 420 Helicopter Motor, 3800...

SOLD - Lot of 10 Blade mCP X batteries - E-flite and Turnigy nano-tech

helifreak.com - 2012-09-10 01:55:11 - Similar - Report/Block

For sale, a lot of 10 used batteries for a stock Blade mCP X helicopter. Two 200mAH 30C E-flite batteries and eight 300mAH 35C Turnigy nano-tech batteries with mCP X connectors. These batteries are around six months old and have been used lightly. They were well cared-for, stored between 3.80V and 3.90V in a foam-lined case, charged on a...

Y7/Z6 mini me swap CEL codes after swap

honda-tech.com - 2012-08-18 05:33:12 - Similar - Report/Block

Just did a vtec head swap on a 98 civic cx with a d16y7 block and d16z6 head. before the swap i was getting a O2 sensor code since the swap im getting 2 new codes P1337 Crank position sensor P0113 Intake air temp All sensors are hooked up exactly the same. Using the P2E ecu until i get a p28. Starts up okay and idles fine. Revs up extreme...

FS turnigy 5S battery

helifreak.com - 2012-07-24 15:10:18 - Similar - Report/Block

Turnigy 5S 3300mAh 30C Lipo. $32 shipped anywhere in the US what you see is what you get thanks for looking Attached Thumbnails...

analyze memory with crash (kdump)

stackoverflow.com - 2012-05-02 23:17:07 - Similar - Report/Block

I have a kdump that says crash> kmem -i PAGES TOTAL PERCENTAGE TOTAL MEM 468778 1.8 GB ---- FREE 2107 8.2 MB 0% of TOTAL MEM USED 466671 1.8 GB 99% of TOTAL MEM SHARED 193447 755.7 MB 41% of TOTAL MEM BUFFERS 746 2.9 MB 0% of TOTAL MEM CACHED 186315 727.8 MB 39% of TOTAL MEM SLAB 26366 103 MB 5% of TOTAL MEM TOTAL SWAP 273103 1...

Unique Key Violation in SQL Server - Is it safe to assume Error 2627?

stackoverflow.com - 2011-06-26 13:47:11 - Similar - Report/Block

I need to catch violation of UNIQUE constraints in a special way by a C# application I am developing. Is it safe to assume that Error 2627 will always correspond to a violation of this kind, so that I can use if (ThisSqlException.Number == 2627) // Handle unique constraint violation. // Handle the remaing errors.

Delonghi esam 4200 se x1 mahlt nicht mehr!!!

kaffee-board.de - 2013-02-22 14:21:28 - Similar - Report/Block

Hallo zusammen! Brauch dringend Rat! Habe einen Delonghi esam 4200 se x1 Vollautomaten. Baujahr dürfte 2010 sein. Folgendes Problem: -Man schaltet die Maschine ein, sie heizt und spült - erster Bezug, egal ob ein o. zwei Tassen, sie möchte die Bohnen mahlen Relais klackt aber es tut sich nichts! - habe Mahlwerk ausgebaut und gesäubert, da...




dialogShowMessage!

Fill out the form you see below. Registration is free, fast and simple.
If you are already registered, sign in page login.


Web Site :
Required Field
First Name :
Required Field
Last Name :
Required Field
Email :
Required Field
Sex :
Required Field

evolveStar.com is free for ever !


evolveStar.com provides a search engine that allows you to gather information to write their own blog.


evolveStar.com enhances the sources displaying the logo of the site.


If you want to remove your site or you believe a site listed infringes copyright, please report it to: info@evolvestar.com


Specifies the subject copyright violation and the url of the page


evolveStar.com respecting the law DMCA (Digital Millennium Copyright Act) will immediately remove whatever its merits.


Next will be effectual and relevant checks.







Who We Are Partner Advertising Contacts Privacy terms Help & FAQ

© Copyright 2010-2017 Fabrizio Fichera. All rights reserved.