Quantcast








     

1st Day Using Nextel XC-116 (1/32") Ceramic Rope

e-cigarette-forum.com - 2013-05-24 11:33:32 - Similar - Report/Block

Been vaping this puppy about 14 hours now and on a verge of making a decision. First off lemme list the hardware: 1. Nextel XC-116 (1/32") Ceramic Wick purchased from Big Tex Vapor 2. Reo Grand from REOSMODS 3. Reomizer 2 from REOSMODS 4. 0.7mm x 0.1mm Kanthal D ribbon wire from ebay (Zivipf Versandhandel) 5. 0.6mm x 0.1mm Kanthal D ribbo...

Is your AGA T2 a juice hog or is it just mine?

e-cigarette-forum.com - 2013-05-24 10:56:06 - Similar - Report/Block

Got my aga t2 a month or so ago. I dont take it out vaping because mine seems to vape juice REALLY fast. For example, I'll fill up the tank to about 3/4 of the way to the top. After about 20 or so minutes of vaping, its almost down to half. No chain vaping here either. I've rebuilt it about 3 times already and keep getting the same perfo...

Problems with Kanthal A on AGA-T2

e-cigarette-forum.com - 2013-05-22 13:11:15 - Similar - Report/Block

Hello! i just get order with Kanthal A and i have problem with this. when i wrap the mesh on the aga-t2 and fire the Kanthal is cut immediatley. I don't know what to do i try about 10 times and is happen over and over again. I'm using Vamo with 2 18350 battery. I need some help :((...

Complete Rebuild of E Roll atomizer?

e-cigarette-forum.com - 2013-05-21 15:25:09 - Similar - Report/Block

Has anyone tried doing this, including the coil? If so, do you have picks or a video? I have a bunch of 32awg kanthal and hemp wick that work great on my rebuilt protanks and wanted to see if this could be done on an eroll atomizer.

Looking for quality kanthal n wick in bulk?

e-cigarette-forum.com - 2013-05-15 15:31:29 - Similar - Report/Block

Im looking for kanthal wire and wick in big amount. I guess the best way for me to get it, is from outside country. Does anyone here know where I can buy it in bulk ? any website that i can look into..

RBA wicking material: Ekowool

e-cigarette-forum.com - 2013-05-14 05:52:13 - Similar - Report/Block

I just received my order of Ekowool from Stormy's today and got to work on building a coil for my Chalice. I always liked silica as a wick, but after all the info on it's potentially hazardous long term effects I figured it was worth giving the supposedly safer and ecologically friendlier Ekowool a shot. There's more info on other ECF t...

Phoenix Dripping Atomizer, SS Wick help...

e-cigarette-forum.com - 2013-05-09 02:53:13 - Similar - Report/Block

I recently bought my first RBA, a phoenix dripping atomizer. I have been running it with a SS wick and am wondering if it is dangerous to attach my wire underneath the screws at the top of the positive and negative posts instead of in the small holes where the leads are intended? The plastic insulators tend to melt if I use the intended h...

Home made coils for the Vivi Nova Clearomizer.

e-cigarette-forum.com - 2013-05-05 11:50:30 - Similar - Report/Block

I wish to make my own coils and wicks. Apparently the most suitable resistance wire is nichrome or kanthal. Can anyone tell me where I can get the correct wire? I stay in Durban. Any ideas on obtaining suitable wick material would also be appreciated.

Canvape's pre coiled wicks okay for my RDA?

e-cigarette-forum.com - 2013-05-05 08:13:42 - Similar - Report/Block

Hey guys, I'm brand new to RDAs. I picked up the Bully II from juggys last week. Vaped great for the first few days. Now i've been getting a burnt sort of taste. the coil is still okay I think, but the wick is blackened. Is it possible to only replace the wick and not the wire? Juggys supplied me with two extra wicks, but no wire. If not,...

Please help me with my SS mesh wicking issues!

e-cigarette-forum.com - 2013-05-05 06:54:31 - Similar - Report/Block

Hey everybody. I got an AGI and built a tight 500 mesh wick. 3 wraps with 32g kanthal on my provari at around 4v. When it gets some juice it works great... when it gets juice. I've tried tilting it and leaving the fill screw out. I can leave it on it's side, wick down for 10 minutes, pick it up and get 1 good hit before it's dry. What am...

AGA-T+/2 Setup Guide

e-cigarette-forum.com - 2013-05-02 15:46:26 - Similar - Report/Block

Hello everyone, I recently purchased a mechanical mod, AGA-T+, and all the supplies needed to rebuild. Also, I drilled out my AGA-T+ for 1/8". Now I was wondering if other people could share some information that I could try as well or even for other people who rebuilds. Such as: 1. the length and width for SS Mesh wick that works best fo...

Wick and coil break in time

e-cigarette-forum.com - 2013-05-01 04:06:23 - Similar - Report/Block

I am on my 3rd wick and coil and everything has a metallic soup can taste. I have vaped each set about 10 mil of juice... its a soup can taste with high and muted flavor. Its not a hot spot yuck taste. The flavor is there but its overpowered with a metal tatse. I am using a natural and rsst, 400 mesh 28g kanthal with 3-4 wraps. Using pul...

evolveStar Join

Wire mesh and kanthal wire question

e-cigarette-forum.com - 2013-04-25 12:25:05 - Similar - Report/Block

Anyone know where to get stainless steel mesh and/or kanthal wire locally? Hopefully a big box store such as Home Depot, Lowes, Radio Shack or something of that nature? No B&Ms that I know of are located where I am or are too far and all the "smoke shops" near me are outrageously expensive.

Absolutely LOVING the IGO-L!

e-cigarette-forum.com - 2013-04-25 07:53:47 - Similar - Report/Block

If you're looking to get into rebuildables, the IGO-L is the perfect RDA to purchase. I'm having a blast with mine. 2.5mm silica wick 28 gauge kanthal 3/4 wrap .8 ohm's 100% liquid Drilled a 1/16 airhole Freaking amazing. What's interesting is the fact that I really like the draw on the IGO-L vs. the Octopus RDA and that has the same siz...

Question about 28g Kanthal wire and the Natural Mech mod

e-cigarette-forum.com - 2013-04-24 07:09:45 - Similar - Report/Block

Hey guys.. So I am waiting on vapemail and I am getting the RSST RBA, Natural Mech Mod, 28 gauge Kanthal wire and 400 SS Mesh.. This is my first venture into rebuildables.. Did I order what I should have? I have been reading that people use 28 gauge and 30 gauge. I know I am going to get a lower ohm with the 28 gauge but will I be okay? I...

New to me, probably not to some of you...28ga. vs 30 or 32 ga. Kanthal - A1

e-cigarette-forum.com - 2013-04-23 18:37:56 - Similar - Report/Block

This post is directed more towards people like...me! People who have been using rba's for a while but maybe aren't true "officianado's" with regards to them and have not had much experience with different gauges of wire etc. I know this post will be more of a "Duh! No $h!T Sherlock" for some of you who have been at this longer than folks...

Where To Get Best Deal On, S/S Mesh, Wire, Ceramic Wick Material ??

e-cigarette-forum.com - 2013-04-23 18:33:14 - Similar - Report/Block

i'm ready to start playing with wicks and heads where's the best place to get the best deals ? 325,400,500 stainless steel mesh ? ceramic material for wicks ? kanthal wire ? .999 silver ? thanks, SD...

Just a few questions.

e-cigarette-forum.com - 2013-04-19 10:10:57 - Similar - Report/Block

First question: I ran a dual wick in my aga t2. I only had one air hole and the vapor production seemed to match that of a single wick set up. Should I bore another hole? If not, how did you guys position it to have it create more vapor? I already have my air hole bored out. Second question: I attempted a U wick set up with a 3/2 wrapped...

How often do you replace SS wick?

e-cigarette-forum.com - 2013-03-25 20:19:37 - Similar - Report/Block

Hey guys. Gonna call out some beginners luck here. Got a VAMO and AGA-T2+ today. 45 minutes after getting the mail. I'm happily vaping away. Most of that time was unboxing, getting batteries on the chargers, etc. First dry burn on the wick had a hot spot on the pos lead. gave the top a bit more wire, bam, perfect imho, from neg post to po...

Kanthal wire retail locations?

e-cigarette-forum.com - 2013-03-25 07:16:16 - Similar - Report/Block

Anyone know of a Canadian retail store that sells kanthal wire suitable for rebuilding coils?...

Rebuilding Vivi Nova

e-cigarette-forum.com - 2013-03-24 05:46:08 - Similar - Report/Block

So I have been vaping for about 3 months now. I have tried many clearomizers and I have an extra liking for the vivi novas. I think I am now ready to rebuild/recoil the vivi novas. My question: If I am using 1.5mm silica wick should I use just one strand or two, or even more? I have a 32 awg kanthal wire. Appreciate any advise. Thanks...

Thanks!! Mini DID quick story

e-cigarette-forum.com - 2013-03-24 04:40:16 - Similar - Report/Block

Just stopping by to say thanks to this section. Got my Mini DID yesterday. First wick and two coils sucked. Rolled second wick and much better. I find wrapping not too bad, and was working ok until I realized the way I was filling it was not working (no syringe yet) and there was next to no juice in it. Filled and much better. I was using...

should i go with wick or no wick

e-cigarette-forum.com - 2013-03-22 17:30:40 - Similar - Report/Block

just wondering about cartomizer or automizers even tanks why i should go with a wick or no wick for a beginner...

New to the forums, AGA resistance question.

e-cigarette-forum.com - 2013-03-22 02:49:26 - Similar - Report/Block

Hey guys, I'm new the forums and been vaping for about 2 months. I recently got into RBA's and picked up an AGA-T+ and love it! I did have a question regarding resistance, but couldnt post in the "Atomizer Issues" section; Guess I'm too new. Anyways, I got my AGA-T+ setup with some 400 ss mesh and a 4/5 wrap of 32 AWG Kanthal A-1. When I...

Short Wick Life Problem SS or Silica

e-cigarette-forum.com - 2013-03-20 17:49:17 - Similar - Report/Block

Wondering if anyone else has this experience. I use a Provari Mini primarily with an A7 or an IGO-L rebuildable; wick set doubled over 2 mil silica & 4 to 5 wraps of 32 ga Kanthal. I drip through about 1 battery a day and find after 3 days or so, I need to make a new wick set up to avoid that burnt wet nasty make-me-cough taste. The wick...

30 Gauge Kanthal A-1 bandwagon

e-cigarette-forum.com - 2013-03-19 17:22:10 - Similar - Report/Block

I've been successfully using 32 Gauge Kanthal A-1 on my genesis attys (6 AGA-T2's with IBTanked glass and 6 SS Satin Vulcans also with IBTanked glass) and some retired plated did clones. The vape was very good, good enough for me to use them almost exclusively for the past month or so. The 32 gauge worked, but it took a decent amount of f...

AGA-T+? Questions/Concerns...

e-cigarette-forum.com - 2013-03-19 06:45:21 - Similar - Report/Block

So a few months ago I bought a bully knockoff. I tryed to wrap a coil... no go, ofcourse I Just used the lil bit of wick they sent me... the airflow was so tight on it anyways lol Regardless, I watched a video on the johnyboy lavagen... I want one, yet I can't afford one. No way no how haha It's down right expensive (Quality though) I've...

Where can I get a case to store my Kanthal wires spools in?

e-cigarette-forum.com - 2013-03-19 02:25:30 - Similar - Report/Block

One of the vape stores I visited sometime ago had this case for kanthal wire spools. Im guessing its something fish related for fishing line spools cuz I remember seeing a fish like sticker on it but im just trying to see if anyone has seen something like this before or know of a product similar to this. Thanks...

Help me identify these clearomizer's please

e-cigarette-forum.com - 2013-03-18 18:24:08 - Similar - Report/Block

hello. Thank you for helping me identify these two clearomizer's. I recently got this clearomizer from a local store and have no idea what brand it is or anything about it. It is a long wick - only comes in a clear tube - cannot be opened at all except to remove the drip tip for filling - I am asking because it feels as though I have to p...

Over Wicking AGA-T?

e-cigarette-forum.com - 2013-03-17 19:13:00 - Similar - Report/Block

I picked up a pair of AGA-T's(original) and did the Cap sanding to align the air holes properly. I have successfully done several Wick/Coils on my MiniDuds and Decided it was time to go Big.:D Well, this isn't working out so well. I have done a double 500 mesh Wick - 1 wrapped then a second additional wrapped to proper diameter. For wire...

Experiments with RBA Zen

e-cigarette-forum.com - 2013-03-13 10:49:08 - Similar - Report/Block

Just wanted to share a bit of info for those highly interested in achieving those "plumes of vapor." This experiment started with: 30g D kanthal 28g A kanthal 325 ss mesh 400 ss mesh 500 ss mesh So for each wire, I made: 3 wrap (1 normal, 1 twisted) 4 wrap (1 normal, 1 twisted) 5 wrap (1 normal, 1 twisted) And for each mesh I made: 3/4 in...

Magic Coil wire/Bakero wire Trying to figure this out

e-cigarette-forum.com - 2013-03-01 10:10:24 - Similar - Report/Block

So there is a thread in the new members forum about this "bakero" wire that is creating massive clouds of vapor which untill recently is unheard of. I'm trying to figure out what it is because the guy selling it won't tell anyone what exactly it is. I have it narrowed down to a kanthal product that is either alkrothal ribbon wire or nikro...

Finally got my first GGTS and Penelope

e-cigarette-forum.com - 2013-03-01 08:33:26 - Similar - Report/Block

So I finally got my first GGTS and a Penelope. I can't tell you guys how excited I am. Now I only got a few questions. 1. What adapters do I need to fit the Penelope and Ithaka (end of the month) on my GGTS? And will the air flow control still work? 2. I bought the Penelope used and the guy sent me Pure Nickel 32 awg non resistance wire a...

Does one really need a multimeter to build coils for a variable volt battery?

e-cigarette-forum.com - 2013-02-26 04:59:02 - Similar - Report/Block

I don't think I even need a multimeter with a variable volt battery anymore. All I need to know is 4/5 wraps with 32 gauge kanthal = about 2.2 ohms (that might be wrong, so don't go by that). As long as my coil's 1.5-2.8, I learned to set the volts to where I get the best vape production & taste and not too high so that I don't get a dry...

Some Basic Physics and a Few Tips for Rebuildable Coils including Kanger T3.

e-cigarette-forum.com - 2013-02-26 00:43:13 - Similar - Report/Block

Physics: The resistance of a given type and thickness of wire is proportional to the length of the wire. The number of coils is irrelevant to resistance, only the total length counts. The resistance of different thicknesses of a given type of wire is inversely proportional to the square of the diameters. eg. if a given length of Kanthal A...

Dual wick macaveli 350

e-cigarette-forum.com - 2013-02-25 13:59:44 - Similar - Report/Block

Im having issues not getting good vape production with a dual coil and wick setup on the Mac350... what am i doing wrong? Im putting about 5 turns of the kanthal wire on each wick...

Keep getting Atomizer Short message on my eVic with twisted wire. HELP!!!!

e-cigarette-forum.com - 2013-02-18 09:45:46 - Similar - Report/Block

I have an AGA-T+. I rolled a 400 ss wick with no problem. I made a twisted wire of 32 gage. I did 3/4 wraps and it wouldn't fire. I keep getting a short message on the evic. I then tried a regular wire with 4/5 wraps and it fires up fine at 2.0 Ohms. Any suggestions?...

Genesis Oddy Set up

e-cigarette-forum.com - 2013-02-13 12:04:43 - Similar - Report/Block

I use kanthal wire 32 and i prefer 2/3 wrap . It gives me resistance about between 1.2 - 1.4 ohms . When i use with my provari i set it 3.3 v . For my mech mod - i use kantal wire 28 and 2/3 wrap which gives me resistance between 0.9 - 1 ohms (basically with 2/3 wrap - less hassle and less hot spots to ease out) I see that some here going...

Vivi nova rebuild head only lasting a day or so. Need some help.

e-cigarette-forum.com - 2013-02-12 13:00:23 - Similar - Report/Block

I am unsure what I am doing wrong when rebuilding these vivi nova heads . Currently I am using kanthal wire and a cotton ball as the wick. I am looking at about 2.4 resistance when testing. The thing works great for about the first day but after that it starts getting sloppy. By sloppy I mean it either starts to flood or the plumes of smo...

source for 30 or 28 guage kanthal??

e-cigarette-forum.com - 2012-10-25 09:12:39 - Similar - Report/Block

hello, im trying to experiment using 28 and 30 gauge kanthal wire. any links would help.. i found a vendor that has some but they r outta stock. vapinaze.com anyone else know of where to grab some.. i know about ebay, but everytime i look i cant find it, or they r outta stock.. plus i dont really want to buy 100ft of it if i only want to...




dialogShowMessage!

Fill out the form you see below. Registration is free, fast and simple.
If you are already registered, sign in page login.


Web Site :
Required Field
First Name :
Required Field
Last Name :
Required Field
Email :
Required Field
Sex :
Required Field

evolveStar.com is free for ever !


evolveStar.com provides a search engine that allows you to gather information to write their own blog.


evolveStar.com enhances the sources displaying the logo of the site.


If you want to remove your site or you believe a site listed infringes copyright, please report it to: info@evolvestar.com


Specifies the subject copyright violation and the url of the page


evolveStar.com respecting the law DMCA (Digital Millennium Copyright Act) will immediately remove whatever its merits.


Next will be effectual and relevant checks.







Who We Are Partner Advertising Contacts Privacy terms Help & FAQ

© Copyright 2010-2017 Fabrizio Fichera. All rights reserved.